AirTeq | Netatmo Pro Sensor - Changing batteries in the refrigerator module

AirTeq | Netatmo Pro Sensor - Changing batteries in the refrigerator module


Each refrigerator module is linked to an indoor module. With the sticker on the sensor you can see which refrigerator module belongs to which indoor module.



If the refrigerator module is no longer connected to the indoor module, you will see the following message.

To solve this problem, it is usually sufficient to replace the batteries, you do this in the following way:

Step 1. Place the refrigerator module next to the indoor module



Step 2. Turn the refrigerator module over, and turn the white cover a quarter turn. 



Step 3.  When you notice that the lid is loose, gently pull the white part out. 



Step 4. Loosen the screws, use a screwdriver if necessary



Step 5. Remove the old batteries and wait 60 seconds.



Step 6. Insert the new batteries into the outdoor module. Pay attention to the + and - side. See the picture. 



Step 7. Place the cover back on the outdoor module, and retighten the screws. Hold the top securely so the screws can be tightened properly.




Step 8. Wait until a green LED starts flashing on the bottom of the outdoor module. 



Step 9. Let the modules stand next to each other for a while. Wait a while for the sensors to connect to each other. 

Step 10. After 5-10 minutes, check the app to see if the pairing was successful. If the pairing was successful, you can place the sensor back in the refrigerator.






    • Related Articles

    • AirTeq | Netatmo Pro Sensor - Outdoor Module / Refrigerator Pairing

      1. Open the app store on your phone and search for 'Netatmo Weather'. 2. Download the app and open it. 3. Click on login and log in with your credentials. 4. Once you are logged in, click on the 3 dashes at the top left of the screen. 5. Click on ...

    • AirTeq | Netatmo Pro Sensor - Installation Guide

      Step 1. Open the app store and search for 'Netatmo Weather'. Step 2. Download and install the app.  Step 3. Log in with your details, don't have an account yet? Then create one.  Step 4. Select that you want to link a weather station.  Step 5. Follow ...

    • AirTeq | Netatmo Pro Sensor: Steps when the sensor is not giving data

      How to tell that the sensor is no longer giving data: 1. In the app: you see no data and get the following message.  2. On the online platform, you will see a red text at the last measurement. Step-by-step plan to solve this: Cause 1: Is the sensor ...

    • AirTeq | Netatmo Pro Sensor - Wifi Configuration

      When something has been changed in your network or the sensor is no longer connected to the network. Then you need to reset the wifi in the device. This is done with the Configure Wifi option.  In the app you can do this in the following way: 1. ...

    • AirTeq Smart | Netatmo Sensor - Set up Wi-Fi via PC

      1. To set up the sensors via PC, you will need Netatmo's configuration program. This can be downloaded from Aircheqonline. - Go to www.aircheqonline.nl -Log in with your data 2. Go to the option 'Support 3. Then click on 'Link sensors via PC'. Do you ...