Use the Netatmo Weather app to install a Netatmo Pro sensor and, if required, add it to Apple HomeKit.
BEFORE YOU START
• Connect the phone to the required 2.4 GHz Wi-Fi network.
• Have the Wi-Fi password ready.
• Keep the HomeKit code on the back of the sensor accessible.
INSTALL THE MAIN MODULE
1. Install and open the Netatmo Weather app.
2. Sign in, or create a Netatmo account if required.
3. Select the option to install a Weather Station.
4. Connect the main module to power and follow the instructions in the app.
5. When requested, confirm that the sensor lights up white.
6. Select the required 2.4 GHz Wi-Fi network and enter its password.
7. Select My home or create a new home or location.
OPTIONAL: ADD TO APPLE HOMEKIT
1. Select Start pairing.
2. Scan the HomeKit code on the back of the sensor.
3. Add the sensor to the correct home and assign a clear name.
4. If required, rename the measurements, such as air quality, CO₂, humidity and temperature.
INSTALL THE ADDITIONAL MODULE
1. Continue in the app after installing the main module.
2. Insert the batteries into the additional module with the correct polarity.
3. Keep it close to the main module while pairing.
4. Give the module a clear name and complete the setup.
The sensors are now linked to the account. Measurements should become visible in the app shortly.