AirTeq Smart Sensor - Wifi Configuration (Reset)

AirTeq Smart Sensor - Wifi Configuration (Reset)

Step 1. Open the app and log in with your credentials if not already done. 
Step 2. Find the sensor you want to configure, you can do this by swiping right/left on your phone/tablet. The name of the device will be at the top of the screen. Make sure you have the correct sensor.
Step 3. Click on the cogwheel (settings) to open it. 



Click on the cogwheel.
Click on configure wifi. 


If the sensor is not yet white/blue when you press it? Then hold the top down until the sensor starts to flash white/blue.

Step 4. The sensor blinks blue/white. now continue on the app. You will see that the app will start searching for the home coach.


Step 5. When the sensor is found you will come to the wifi configuration screen. Select the network you want to connect to and click next.


Step 6. The sensor is connected to the network click ready.


Step 7. The installation is complete. 




    • Related Articles

    • AirTeq | Netatmo Pro Sensor - Wifi Configuration

      When something has been changed in your network or the sensor is no longer connected to the network. Then you need to reset the wifi in the device. This is done with the Configure Wifi option.  In the app you can do this in the following way: 1. ...

    • AirTeq Smart | Netatmo Sensor - Set up Wi-Fi via PC

      1. To set up the sensors via PC, you will need Netatmo's configuration program. This can be downloaded from Aircheqonline. - Go to www.aircheqonline.nl -Log in with your data 2. Go to the option 'Support 3. Then click on 'Link sensors via PC'. Do you ...

    • AirTeq Smart Sensor - set up Wi-Fi via phone

      1. Open the app store on your cell phone.  2. Download the app "Healthy Home Coach. 3. Click on log in if you have already created or received a Netatmo account from Airteq. If not, click on register and create an account. 4. Fill in your details 5. ...

    • AirTeq | Netatmo Pro Sensor: Steps when the sensor is not giving data

      How to tell that the sensor is no longer giving data: 1. In the app: you see no data and get the following message.  2. On the online platform, you will see a red text at the last measurement. Step-by-step plan to solve this: Cause 1: Is the sensor ...

    • AirTeq | Netatmo Pro Sensor - Installation Guide

      Step 1. Open the app store and search for 'Netatmo Weather'. Step 2. Download and install the app.  Step 3. Log in with your details, don't have an account yet? Then create one.  Step 4. Select that you want to link a weather station.  Step 5. Follow ...