Aranet Pro - Base station configuration (Customers)

Aranet Pro - Base station configuration (Customers)

Setting up Base Station:


Step 1. Open the box. 
Step 2. Take all items out of the box

 

Box contents:

1. Ethernet cable

2. Aranet mount

3. Aranet Pro Base Station

4. Adapter

5. 2 screws




Step 3. Attach the base station to the mount if desired. Place the base station at the desired position and secure it with the screws.


Step 4. Plug in the adapter and turn on the base station. 

Step 5. Connect the Ethernet cable to the base station. Then connect the cable to a network. You can do this by connecting to a router, for example. After a successful connection the LAN LED will start blinking orange. 

The sensors are already connected. As soon as the base station has an active connection the sensors will come online.
_________________________________________________________________________________________________________________

    • Related Articles

    • Aranet Pro - Base station & sensors setup (Dealers)

      Manual to connect an Aranet Base Station with Aranet4 pro sensors to Aircheqonline. Requirements: -Aranet4 Pro Base station INCLUDING MQTT LICENSE.  -Aranet4 Pro sensors Recommended: Router Setting up the base station Step 1. Open the box of the ...

    • AirTeq | Netatmo Pro Sensor - Wifi Configuration

      When something has been changed in your network or the sensor is no longer connected to the network. Then you need to reset the wifi in the device. This is done with the Configure Wifi option.  In the app you can do this in the following way: 1. ...

    • AirTeq | Netatmo Pro Sensor - Outdoor Module / Refrigerator Pairing

      1. Open the app store on your phone and search for 'Netatmo Weather'. 2. Download the app and open it. 3. Click on login and log in with your credentials. 4. Once you are logged in, click on the 3 dashes at the top left of the screen. 5. Click on ...

    • AirTeq | Netatmo Pro Sensor: Steps when the sensor is not giving data

      How to tell that the sensor is no longer giving data: 1. In the app: you see no data and get the following message.  2. On the online platform, you will see a red text at the last measurement. Step-by-step plan to solve this: Cause 1: Is the sensor ...

    • AirTeq Smart Sensor - Wifi Configuration (Reset)

      Step 1. Open the app and log in with your credentials if not already done.  Step 2. Find the sensor you want to configure, you can do this by swiping right/left on your phone/tablet. The name of the device will be at the top of the screen. Make sure ...