First use of a Touch sensor

First use of a Touch sensor



Step: 1
Place the sensor in the room you want to measure.

Depending on the type of sensor, it can be placed on a cabinet or hung on the wall.
Caution: do not place the CO2 meter next to open windows or doors, or next to the outlet of ventilation
Or in the breathing zone of a user.


Step 2:
Connect the sensor with the supplied adapter.


Step 3:
Turn on the sensor and connect it to the WiFi.
The sensor will now connect to a time server. The sensor will now show the correct time in the display.
At the bottom of the display appears: WiFi connected.

The sensor is now saving the measurement data in its internal memory.
If you use online monitoring, this is visible in the account.

If you do not use online software but would like to try it for free, please contact us.
    • Related Articles

    • AirTeq | Netatmo Pro Sensor - Wifi Configuration

      When something has been changed in your network or the sensor is no longer connected to the network. Then you need to reset the wifi in the device. This is done with the Configure Wifi option.  In the app you can do this in the following way: 1. ...
    • AirTeq | Netatmo Pro Sensor: Steps when the sensor is not giving data

      How to tell that the sensor is no longer giving data: 1. In the app: you see no data and get the following message.  2. On the online platform, you will see a red text at the last measurement. Step-by-step plan to solve this: Cause 1: Is the sensor ...
    • AirCheq Touch Pro - Setting up Lora network on router

      1. Connect the cables to the router and connect the router to the power outlet  2. When the wifi light is on, go to your network settings and connect to the router. 3. When connected to the router, open your browser and go to: 192.168.1.1 4. The ...
    • AirTeq | Netatmo Pro Sensor - Changing batteries in the refrigerator module

      Each refrigerator module is linked to an indoor module. With the sticker on the sensor you can see which refrigerator module belongs to which indoor module. If the refrigerator module is no longer connected to the indoor module, you will see the ...
    • AirTeq Smart Sensor - Wifi Configuration (Reset)

      Step 1. Open the app and log in with your credentials if not already done.  Step 2. Find the sensor you want to configure, you can do this by swiping right/left on your phone/tablet. The name of the device will be at the top of the screen. Make sure ...