Problem: AirCheq Touch - WiFi but no data on AirCheq.eu

The sensors send the data via MQTT or http.

Sometimes the MQTT data is stopped by the router. 

You can solve this easily.

You do this in the following way:

1) Open the settings.                                              2. Go to the 2nd page and open the lock

3) Enter the code 3036 and click on the lock.                    4. Turn on the Http & AES option. Then click on next.

The data will now be visible in AirCheq.eu (can take up to 5 minutes)

• Related Articles

• Wifi specifications touch sensor(s) safety & Netatmo

  Wifi specifications touch sensor(s) safety & Netatmo Table of contents Wifi specifications: Suitable for Wi-Fi 802.11 b/g/n (2.4 GHz). Supported security: Open/WEP/WPA/WPA2-personal (TKIP and AES). https://www.nslookup.io/dns-records/aircheq.eu If ...

• Handleiding AirCheq Se / Pro / Aero

  Handleiding AirCheq Se / Pro / Aero alleen in het engels beschikbaar

• Differences between different accounts AirCheq.eu

  Below is an overview of the different types of accounts within Aircheq and what they can and cannot do. Administrator account This account has all rights for a location. This means that this account can add, change and delete sensors. Settings can ...

• AirTeq | Netatmo Pro Sensor - Wifi Configuration

  When something has been changed in your network or the sensor is no longer connected to the network. Then you need to reset the wifi in the device. This is done with the Configure Wifi option.  In the app you can do this in the following way: 1. ...

• AirTeq | Netatmo Pro Sensor: Steps when the sensor is not giving data

  How to tell that the sensor is no longer giving data: 1. In the app: you see no data and get the following message.  2. On the online platform, you will see a red text at the last measurement. Step-by-step plan to solve this: Cause 1: Is the sensor ...